top of page

How to Install an Exhaust Tip (Step-by-Step)

Updated: Jan 8

Exhaust tips are a popular aftermarket accessory for car enthusiasts looking to customise the look and sound of their vehicle. Installing an exhaust tip is a relatively simple process that can be done at home with the right tools and a little bit of knowledge.


In this article, you'll learn how to install an exhaust tip and everything else you need to know about it, including whether you can do it yourself, the costs involved, and how to choose the right size and shape for your car.

 

Table of Contents:


silver exhaust tips on a car

Can You Install an Exhaust Tip Yourself?

Installing an exhaust tip is a task that most car enthusiasts can tackle on their own. It typically involves removing the old exhaust tip and replacing it with a new one.


The process will vary depending on the type of exhaust tip you have and whether it is welded or bolt-on. In general, installing an exhaust tip is a straightforward process that can be done with basic hand tools and a jack stand.


How Much Does It Cost to Put On Exhaust Tips?

The cost of installing an exhaust tip will depend on the type of tip you choose and whether you do it yourself or hire a professional.


  • Bolt-on exhaust tips are generally the least expensive option, costing anywhere from $20 to $100 (approx. £14 to £71 or €17 to €83).

  • Weld-on exhaust tips are more expensive, with prices ranging from $50 to $200 (approx. £36 to £143 or €42 to €242).


If you decide to hire a professional to install your exhaust tip, the cost will depend on the labor rate at the shop and the complexity of the job. On average, you can expect to pay between $50 and $100 for labor (approx. £36 to £71 or €42 to €83).


Do You Have to Weld an Exhaust Tip?

Whether you need to weld an exhaust tip depends on the type of tip you have and the installation method you choose.


Bolt-on exhaust tips can be easily installed by tightening the screws or bolts that hold them in place. Weld-on exhaust tips, on the other hand, require more permanent installation using a welding process.


If you are not comfortable with welding, it is best to leave this task to a professional.


How to Install an Exhaust Tip

Installing an exhaust tip is a relatively simple process that can be done at home with the right tools and a little bit of knowledge. Below are the steps you'll need to follow to install an exhaust tip.


  1. Choose the Right Exhaust Tip Size and Shape: The first step in installing an exhaust tip is choosing the right size and shape for your car. It's important to select a tip that fits the size of your exhaust pipe and complements the overall look of your car. Measure the diameter of your exhaust pipe and make sure to choose a tip that is slightly larger to ensure a secure fit.

  2. Check Your Bumper and Exhaust Tip Clearance: Before installing your exhaust tip, make sure there is enough clearance between the tip and your bumper. You don't want the tip to be too close to the bumper, as it could cause rubbing or damage. Measure the distance between the tip and bumper to ensure a proper fit.

  3. Use a Lubricant Such as WD-40 to Slide the Exhaust Tips Into Place: To make the installation process easier, you can use a lubricant such as WD-40 to help slide the exhaust tip into place. Simply apply the lubricant to the inside of the tip and the end of the exhaust pipe. This will help the tip slide into place smoothly and reduce the risk of scratching or damaging the paint.

  4. Tighten the Screws or Weld Them Into Place: Once the exhaust tip is in place, you'll need to secure it to the exhaust pipe. If you chose a bolt-on exhaust tip, you'll need to tighten the screws or bolts that hold it in place. Make sure to tighten them evenly to ensure a secure fit. If you chose a weld-on exhaust tip, you'll need to weld it to the exhaust pipe using a welding process. This is a more permanent installation and should only be done by someone who is comfortable with welding.


Do Bolt on Exhaust Tips Fall Off?

Bolt-on exhaust tips can fall off if the screws or bolts are not tightened properly. It's important to make sure to tighten them evenly to ensure a secure fit. If you notice that your bolt-on exhaust tip is loose, you'll need to tighten the screws or bolts to prevent it from falling off.


You can use loctite to ensure the bolts do not come loose.


Will Adding an Exhaust Tip Change the Sound?

Adding an exhaust tip can slightly change the sound of your car's exhaust system, but the effect will depend on the size and shape of the tip. In general, larger exhaust tips will produce a louder and deeper sound, while smaller tips will result in a quieter and more subtle sound.


Although the sound difference from exhaust tips is very minimal, it is still a consideration to make when choosing the right size and shape of exhaust tip, as it can help you achieve the sound you want for your car.


Conclusion

Installing an exhaust tip is a simple process that can be done at home with the right tools and a little bit of knowledge. Whether you choose a bolt-on or weld-on exhaust tip, the process is relatively straightforward and can add a stylish touch to your car's exterior.


Just make sure to choose the right size and shape for your car, and follow the proper installation instructions to ensure a secure fit.

8 views